How to Use the 893u2is Multi-function Hard Drive with Dock
How to Use the 893u2is Multi-function Hard Drive with Dock
The 893u2is is a multi-function hard drive with dock that can directly exchange data between two different types of HDDs. It supports USB 2.0, SATA and IDE interfaces, and can read SD cards as well. It also has a blue laser indicator and a soft reset button. In this article, we will show you how to use the 893u2is multi-function hard drive with dock.
What You Need
A 893u2is multi-function hard drive with dock
A power adapter
A USB cable
A SATA cable (optional)
An IDE cable (optional)
A screwdriver
One or two HDDs (SATA or IDE)
A SD card (optional)
A computer with a USB port
How to Install the HDDs
Make sure the power switch on the back of the 893u2is is turned off.
Use the screwdriver to open the cover on the top of the 893u2is.
Insert one or two HDDs into the corresponding slots on the 893u2is. You can use SATA or IDE HDDs, or both. Make sure they are securely connected.
Close the cover and fasten it with screws.
How to Connect the 893u2is to Your Computer
Connect the power adapter to the 893u2is and plug it into a power outlet.
Connect the USB cable to the 893u2is and your computer.
If you want to use the SATA interface, connect the SATA cable to the 893u2is and your computer.
If you want to use the IDE interface, connect the IDE cable to the 893u2is and your computer.
Turn on the power switch on the back of the 893u2is. The blue laser indicator will light up.
Your computer will detect the 893u2is and install the driver automatically. You can also download the driver from this link.
You can now access your HDDs from your computer. You can copy, delete, format or backup your files as you wish.
How to Use the SD Card Reader
Insert a SD card into the slot on the front of the 893u2is.
Your computer will detect the SD card and assign it a drive letter.
You can now access your SD card from your computer. You can copy, delete, format or backup your files as you wish.
How to Use the Soft Reset Button
If your HDDs or SD card are not working properly, you can use the soft reset button to restart them. The soft reset button is located on the front of the 893u2is, next to the power button. To use it, you need to press it with a screwdriver or a similar tool. Do not press it with your finger or palm.
How to Switch Between HDDs
If you have two HDDs installed on the 893u2is, you can switch between them by using the buttons on the front of the 893u2is. There are two buttons, one for each HDD. The button with the number 1 corresponds to the HDD on the left slot, and the button with the number 2 corresponds to the HDD on the right slot. To switch between HDDs, you need to press the button of the HDD you want to access. The blue laser indicator will flash to show which HDD is active.
893u2is User Manual
How to Safely Remove the 893u2is
Before you remove the 893u2is from your computer, you need to make sure that you have closed all the files and programs that are using the HDDs or SD card. Then, you need to follow these steps:
Click on the "Safely Remove Hardware and Eject Media" icon on the system tray of your computer.
Select the 893u2is from the list of devices and click on "Eject".
Wait until you see a message that says "Safe to Remove Hardware".
Turn off the power switch on the back of the 893u2is.
Disconnect the USB cable, SATA cable and IDE cable from the 893u2is and your computer.
Disconnect the power adapter from the 893u2is and the power outlet.
You can now remove the HDDs or SD card from the 893u2is if you want.
Troubleshooting
If you encounter any problems while using the 893u2is, you can try these solutions:
If your computer does not detect the 893u2is, check if the power switch is turned on, if the cables are properly connected, and if the driver is installed correctly.
If your HDDs or SD card are not working properly, check if they are securely inserted, if they are formatted correctly, and if they have enough free space.
If your HDDs or SD card are corrupted or damaged, try to use a data recovery software or contact a professional service.
If your 893u2is is overheating, smoking or making strange noises, turn it off immediately and unplug it from the power source. Do not attempt to open or repair it by yourself. Contact the customer service for assistance.
29c81ba772
https://www.wilsonramos.com/group/grupo-vision/discussion/bede0bfb-0d03-470d-93d3-d2994ad86972